Three Phase PC Transparent Mechanical Meter

Product Description

Three Phase PC Transparent Mechanical Meter DT862 we produce to export to Mid east, Africa, Russia, South of east Asia market.

1. Meter case
The meter case meets the protection requirements set by IP52 of IEC60529, the series typs of case and terminal cover are available
2. Terminal
The conncton terminals are made of nickel plated brass with features of high mechanical strength good conductivity and corrosion resistance
3. Drive system
It has three electromagnet elements, each element consists of a voltage element and a current element, all of whch are mounted on the meter frame with two screws, voltage coil is enwrapped in a thermoplastic case to ensure fine insulation, in additionthe voltage element has a low load adjustment mechanisam
4. Roto
The roto disk is made of a hard and high puity aluminum, the rotor shaft is turned of high strength brass, there is a small hole on the upper end for storing lubrication and for fitting a brass bearing, the lower end is cone shaped to ensure fine guiding of the rotor
5. Braking element
The magnet cube is made of ALNICO5 alloy and designed as U shaped so that the effect of short time over currents upon the magnet is negligible a temperature compensation plate made of a special alloy is mounted outside of the magnet, the error of full load can be controlled precisely by turning the adjustment mechanism
6. Frame
The frame is die casted by high quality aluminum silicon alloy of stable property to avoid distortion, the application of static spray painting on the surface prevents the frame from oxidation
7. Upper bearing
The guide pin is made of abrasion proof stainless steel and embedded into the brass sleeve
8. Lower bearing
Both double jewel bearing and magnetic bearing are available
9. Register
The cyclometer type register consists of six drums, the kwh can be read directly. The drum is made of polycarbonate, the frame is made of hard aluminum alloy and can be manually adjusted and fixed with two screws to insure the proper mesh with the worm on the rotor shaft

Technical data
1. Meter type DT862
2. Accuracy 2.0 class
3. Current 1.5(6)A 2.5(10)A 5(20)A 10(40)A 15(60)A 20(80)A 30(100)A
4. Rating current of transformer in 5A directly connection
5. Reference voltage 3*57.7/100v 3*220/380V 3*230/400V 3*240/415V
6. Frequency 50Hz 60Hz
7. Power loss in voltage circuit 1.0W/5VA
8. Power loss in current circuit is less than 0.5VA
9. Starting current 0.5%Ib
10. Register: Cyclometer single, Unidirectional

More Product Features